User Guide

Device
18
Device
Date & Time
You can set date and time. Set the date and time accurately in order to collect accurate log data.
1 Press ESC and authenticate with the Admin level credential.
2 Select DEVICE > Date & Time, then press .
3 Select the desired item and then change the settings by pressing or .
• Date: Check the current date. To modify it directly, set Disabled for Time Sync.
• Time: Check the current time. To modify it directly, set Disabled for Time Sync.
• Time Zone: Set the time reference of the current location.
• Time Sync: Synchronize the server and the time. If you wish to synchronize the server and the time, enable Time Sync.
• Date Format: Set the date format. You can select among YYYY/MM/DD, MM/DD/YYYY and DD/MM/YYYY.
• Time Format: Set the time format. You can select either 24-Hour or AM/PM.
4 To save settings, press OK.
DST
You can use the device by applying DST(Daylight Saving Time). Set the start and end time correctly.
1 Press ESC and authenticate with the Admin level credential.
2 Select DEVICE > DST, then press .
3 Select the desired item and then change the settings by pressing or .
4 To save settings, press OK.
Relay
You can set the open time and the input port of the exit button in the device. This option is useful when the device is used as a
standalone.
1 Press ESC and authenticate with the Admin level credential.
2 Select DEVICE > Relay, then press .
• Relay: You can set whether relay is enabled or not. To set the open time and the input port of the exit button, set to Enabled.
• Open Time: Set the duration for the door to remain open when standard user authentication has been carried out.
• Exit Button: Select the input port where the exit button is connected.
3 To save settings, press OK.