User Guide

Table Of Contents

Auth

Mode

Fingerprint Mode

You can set the schedule to be used for each authentication method using a fingerprint.

1 Press ESC and authenticate with the Admin level credential.

2 Select AUTH > Auth Mode > Fingerprint Mode, then press .

3 Select the desired item and set the schedule by pressing or .

• : Mode to use a fingerprint only.

• + : Mode to authenticate with a fingerprint and then enter a PIN.

4 To save settings, press OK.

NOTE

• A schedule can be set in BioStar 2. If there is no set schedule, only Not Used and Always can be selected.

• For detailed contents regarding setting a schedule, refer to BioStar 2 Administrator's manual.

Card Mode

You can set the schedule to be used for each authentication method using a card.

1 Press ESC and authenticate with the Admin level credential.

2 Select AUTH > Auth Mode > Card Mode, then press .

3 Select the desired item and set the schedule by pressing or .

• : Mode to use a card only.

• + : Mode to authenticate with a card and then authenticate with a fingerprint.

• + : Mode to authenticate with a card and then enter a PIN.

• + / : Mode to authenticate with a card and then authenticate with a fingerprint or enter a PIN.

• + + : Mode to authenticate with a card and then use both fingerprint authentication and PIN input.

4 To save settings, press OK.