User Guide

User
11
User
Registering user information
The user information including fingerprints can be registered.
1 Press ESC and authenticate with the Admin level credential.
2 Select USER > Add User, then press .
3 Select the desired item, then press and set or . When you press OK, the user information will be registered.
• User ID: Enter a number between 1 and 429467295 to register as the user ID. If User ID Type set to Alphanumeric, a combination of
alphanumeric characters and symbols (_, -) can be used for the ID. Up to 32 characters can be input.
• User Name: Enter the user name using the number keypad and the function button.
• Fingerprint: Enroll a fingerprint for user authentication. Scan the fingerprint of a finger you wish to enroll, and then scan the fingerprint of
the same finger again. You can delete the fingerprint by selecting a fingerprint to delete and pressing . You can also scan the
fingerprint again by pressing . To add a fingerprint, select + Add Finger, then press .
• Card: Register a card for user authentication. Scan the card that will be assigned to the user.
• PIN: Enter the PIN you wish to use. Enter the PIN you wish to use, and then enter the same PIN again for confirmation. Enter a number
between 4 and 16 digits to prevent leaking.
• Operator Level: Select the level you wish to assign to a user.
• Start Date: Set a start date to use the user account.
• Expiry Date: Set the expiry date of the user account.
• 1:1 Security Level: Set the security level for 1:1 authentication.
• Duress: Select a fingerprint to be used as a duress fingerprint. This can be used only when 2 or more fingerprints have been enrolled.
• Private Auth Mode: Change the authentication method according to the user.
4 To save settings, press OK.
NOTE
Available menus vary according to the set operator level.
• Normal User: This is the normal user level. Menus cannot be accessed.
• Administrator: All menus can be accessed.
• Configuration: AUTH, DISPLAY, DEVICE, NETWORK, EVENT LOG menus can be accessed.
• User Management: USER, EVENT LOG menu can be accessed.