Operation Manual

28
5. Press the or key to change the LCD on-time length from 30-60 se-
conds and 10secod as a step.
6. Press the OK key to save the setting and LCD display S u c c e s s -
f u l for 2 seconds and exit to current set up state. You can follow the
instruction on screen to exit from the set up or go to other settings.
E. Contrast Adjust
1. Press and hold the "SET" key for more than 3 seconds, then release
it.
2. Press the or key to select the "Configure", and then press
the OK key.
3. Press the or key to select the “Contrast”, and then press the OK
key.
4. Press the or key to adjust contrast level, when you satisfy it then
press the OK key. The screen display S u c c e s s f u l for 2 seconds
and exit to current setup state. You can follow the instruction on the
screen to exit the set up or go to other settings.
TV 010
SUN 11:45
Code Setup? Configure
Time Setup? LCD ON/OFF? LCD?
ON?
SET 3S
or
OK
LCD
OFF?
ON 30 SEC ON 60 SEC
oder
OK
or
Seccessful
OK
GB
Downloaded from www.Manualslib.com manuals search engine