Operation Manual

5. Press the or key to change length of light time from 5-30 SEC and

5seconds as a step.

6. Press the OK key to save setting and LCD display S u c c e s s f u l

for 2 seconds and exit to current setup state. You can follow the

instruction on the screen to exit from the set up or go to other set-

tings.

D. LCD ON/OFF

If you set "LCD ON/OFF" to "ON", that means the LCD screen is always

on (it is convenient to see the status but it is bigger power consumption). If you

set up "LCD ON/OFF" to "OFF", the LCD screen will be on for some time and

then be off after any operation on your remote control and you can change the

length of on-time as below steps.

1. Press and hold the "SET" key for more than 3 seconds, then release

it.

2. Press the or key to select the "Configure", and then press

the OK key.

3. Press the or key to select the "LCD ON/OFF? ", then press the

OK key.

4. Suppose that you press the or key to change from "ON" to "OFF"

mode, and then press OK key.

TV 010

SUN 11:45

Code Setup? Configure

Time Setup?

Light ON/OFF?

Light?

ON?

SET 3S

ON 5 SEC ON 10 SEC

Seccessful

DVD

Downloaded from www.Manualslib.com manuals search engine