Operation Manual

5. Press device key to select the device that you want to fix (e.g. TV).

6. Press the OK key to save setting and LCD display S u c c e s s f u l

for 2 seconds and exit to current set up state. You can follow the in-

struction on the screen to exit from set up or go to other settings.

Remark:

You can fix all current device codes.

C. Backlight

If you set "Light ON/OFF" to "OFF", the backlight will never be on. When

you set "Light ON/OFF" to "ON", the backlight will be lighted up when you

press any key and it will light up for a while even after you finish the operation.

You can adjust the on-time length of the backlight by following steps.

1. Press and hold the "SET" key for more than 3 seconds, then release

the pressed key.

2. Press the or key to select the "Configure", and then press

the OK key.

3. Press the or key to select the "Light ON /OFF? ", then press the

OK key.

4. If the screen shows "Light On" (or you press the or to choose ON),

and prees OK.

TV 010

SUN 11:45

Code Setup? Configure

Time Setup? Device Lock? Unlock?

Seccessful

SET 3S

Lock? Lock?

Lock?

DVD

Downloaded from www.Manualslib.com manuals search engine