Data Sheet

2
Step 2. Select and save, the select the option, move the throttle stick back to the
Full-up-position., When you hear the sequence for the option you wish to select. The
controller will then save the selected option, and sound a long beep as a confirmation. It
then goes back to the beginning of the programming sequence (phrases 2).
Step 3. Complete programming and exit programming mode. Setup all the parameters you
need to change. When complete, move the throttle stick to the Lowest (Down) Position.
The controller will save all options and re-initialize in normal running mode so you can start
your motor.
The table below summarizes the various programming options for each parameter:
Option 1.1 Cell Type and Number of Cells
♪—
Only for 50A/60A/70A/ 100A-LV / 200A-LV
70A+UBEC 100A+UBEC (LV as 2S-7S)
• — 1 Short + 1 Long NiMh/NiCD Auto Cell Count - 0.8V/Cell
Cutoff Voltage *
• — — 1 Short + 2 Long 7S Li-Po (25.9V) – 21V Cutoff Voltage
• — — — 1 Short + 3 Long 6S Li-Po (22.2V) –18V Cutoff Voltage
• — — — — 1 Short + 4 Long 5S Li-Po (18.5V) – 15V Cutoff Voltage
• — — — — —1 Short + 5 Long 4S Li-Po (14.8V) – 12V Cutoff Voltage
• — — — — — — 1 Short + 6 Long 3S Li-Po (11.1V) – 9V Cutoff Voltage
• — — — — — — — 1 Short + 7 Long 2S Li-Po (7.4V) – 6V Cutoff Voltage
Option 1.2 Cell Type and Number of Cells
♪—
Only for 80A-HV/100A-HV (HV as 6S-10S)
• — 1 Short + 1 Long NiMh/NiCD Auto Cell Count - 0.8V/Cell
Cutoff Voltage *
• — — 1 Short + 2 Long 10S Li-Po (37V) – 30V Cutoff Voltage
• — — — 1 Short + 3 Long 9S Li-Po (33.3V) – 27V Cutoff Voltage
• — — — — 1 Short + 4 Long 8S Li-Po (29.6V) – 24V Cutoff Voltage
• — — — — —1 Short + 5 Long 7S Li-Po (25.9V) – 21V Cutoff Voltage
• — — — — — — 1 Short + 6 Long 6S Li-Po (22.2V) – 18V Cutoff Voltage
Option 1.4 Cell Type and Number of Cells
♪—
Only for 80A-12S/200A-12S (UHV as
8S-12S)
• — 1 Short + 1 Long NiMh/NiCD Auto Cell Count - 0.8V/Cell
Cutoff Voltage *
• — — 1 Short + 2 Long 12S Li-Po (45.4V) – 39V Cutoff Voltage
• — — — 1 Short + 3 Long 11S Li-Po (41.7V) – 33V Cutoff Voltage
• — — — — 1 Short + 4 Long 10S Li-Po (37V) – 30V Cutoff Voltage
• — — — — —1 Short + 5 Long 9S Li-Po (33.3V) – 27V Cutoff Voltage
• — — — — — — 1 Short + 6 Long 8S Li-Po (29.6V) – 24V Cutoff Voltage