User's Manual

After mounting and wiring is complete, test the operation of the system to be

sure that the winch is operating in the proper direction utilizing the transmitter.

If not, troubleshoot.

1. Press the red power button on the transmitter to activate the system.

2. Check to see that the operation of the transmitter corresponds to the opera

tion of the winch.

3. Check the power function. After pressing the red power button, the winch

should not be able to be controlled by the transmitter.

4. If the checks are nished and everything is functional, the system is opera

tional.

Check to ensure that the ground and positive leads from

the battery are disconnected before performing any

electrical work.

OPERATION TEST

WARNING

(Fig. 5)

BLACK Wire

from

Harness

Assembly

RED Wire

from

Harness

Assembly

GREEN Wire from

handle bar switch

(green wire passes

through connector)

Splice Connector

YELLOW Wire from

Harness Assembly

(closed o side of

connector used)

BLACK Wire from

handle bar switch

(black wire passes

through connector)

BLUE Wire from

Harness Assembly

(closed o side of

connector used)

SPANISH