User's Manual

Misuse or abuse of this equipment could result in injury to the user or others

and/or damage to property.

The control will be brought to a stop if:

1. the red power button is activated

2. system encounters the same frequency from an outside source

3. ve minutes go by since the last transmission

These safety features are engineered into

the system to protect personnel and

equipment and should never be changed,

taken out or bypassed.

If an emergency situation arises immediately

press the red power button on the transmitter

see (Fig. 1)

1. Never leave the transmitter unattended.

2. The transmitter is only to be used where there is a clear view of the operating

machinery.

3. Do not use more than one transmitter for one receiver box. If you own or

purchase a backup transmitter it is important to stow the second transmitter

securely. When the system is rst put into use, the backup unit should be tested

then have its battery removed and the unit should be stored in a secure place

to avoid accidental operation, which may result in serious injury or death.

4. Both the transmitter housing and buttons should be checked on a regular

basis and, if damaged, the transmitter should be taken out of use.

5. In an emergency situation, pressing the red stop button should immediately

activate the stop relay in the receiver. Remove power to the machine.

Fig. 1

LED 1

Power Button

SPANISH

AVERTISSEMENT