User's Manual
the system and run the wires through the connector units. If the receiver is being mounted
on a vehicle, there should be four rubber grommets between the box and the body of the
vehicle to reduce shock to the receiver.
It is important to operate the machine with no electrical connection prior to the
supply voltage being supplied to the receiver. Aer all components are connected the
supply voltage can be delivered to the receiver.
e eective operating distance of the transmitter and the receiver are partially dependent
on the landscape features and can vary greatly. Also electrical motors can add interference
and the receiver should not be mounted in close proximity to such motors. e greatest
operating distance can be achieved by mounting the receiver box high and away from
contact with metal surfaces.
4. Operation of the Radio Remote System
Before using the wireless system, the following safety steps must be followed:
4.1 Optical Test
– Check to see if the transmitter has been damaged
– Are all safety features available and working?
– Are all the rubber parts including protective cover and buttons undamaged?
If any parts of the system show damage or signs of wear they should be repaired before
further use.
4.2 Safety check and starting the wireless system
– Turn on the supply voltage to the receiver. LED lights 1 and 4 should be lit up.
– Press buttons 1 and 2 simultaneously for 3 or more seconds. LED light 3 should
light up and remain on.
– e start/stop relay engages and should remain engaged.
– Check to see if the operation of the transmitter corresponds to the operation of
the machinery.
– Check the stop function. Aer pressing the stop button, the machine should not
be able to be controlled by the transmitter.
– If the checks are nished and everything is functional, press buttons 1 and 2
again for 3 seconds.
e system is operational.
If the test is not positive then the machine must be stopped
immediately and the manufacturer should be contacted. Do
not work with a machine whose emergency stop is not working
correctly. Damage to persons and/or property could be the result.
Any action that does not follow these guidelines will result in the
voiding of the warranty.