User's Manual
1.1 Safety of this radio remote control
is wireless system is equipped with electronic safety devices
THE FOLLOWING IS IMPORTANT FOR YOUR SAFETY
Misuse or abuse of this equipment could result in injury to the user or others and/or
damage to property.
Everyone who uses this equipment must:
– Be qualied to use the machinery and have been introduced to the
wireless system
– Follow exactly the safety rules
– Have read the manual with care
Safety Factors
1) e product may only be installed, maintained and used by trained professionals.
Repairs must be done by Superwinch.
2) Never leave the transmitter unattended.
3) e transmitter is only to be used within the conners of the working space and
this space is to be clearly dened.
4) Using more than one transmitter for one receiver box is not allowed. If you own
or purchase a backup transmitter it is important to note: improperly stowing a
second transmitter is a security risk. When the system is rst put into use, the
backup unit should be tested then have it’s battery removed and the unit should
be stored in a secure place. If these safety regulations are not followed closely, the
machine could be set in motion by a non-professional by accident and this could
result in serious injury or death.
5) Both the transmitter housing and buttons should be checked on a daily basis and,
if damage is present, the transmitter should be taken out of use.
6) Also, the battery level must be checked daily. If the battery level is too low and
LED light 2 on the transmitter is ashing, then the battery should be changed.
7) e stop button should be checked before each shi to see if the signal is reaching
the receiver.
8) In an emergency situation, pressing the red emergency stop button should
immediately activate the stop relay in the receiver and the electrical current to the
machine should be cut.