User Guide

5
SAFETY
C. Dangers:
1. Vehicle batteries contain gasses that are ammable and can explode violently.
Always wear eye protection.
Always remove all jewelry.
Always keep spectators away.
Always follow wiring diagrams.
Always disconnect winch from power source when working on the winch.
Never install winch or electrical connections while vehicle is running.
Never lean over the battery while making connections.
2. Improper wiring can result in re or electrical shock.
Always follow wiring diagrams.
Always remove all jewelry.
Always inspect the switch and wiring for cracks, pinched spots, and frayed or loose
connections. Damaged components must be replaced before operation.
Always insulate and protect all exposed wiring and electrical terminals.
Always place supplied terminal boots on wires and terminals as directed by
installation instructions.
Never connect DC Powered winches to AC current.
Never route electrical cables across sharp edges; near parts that get hot, nor
through or around moving parts.
Never operate an AC winch outdoors or in a corrosive or explosive environment.
Never operate an DC winch in an explosive environment.
3. I mproper use or overloading of the winch can result in a release of load or rope failure.
Before winching a load, be sure the freespool is fully in the engaged position.
Always apply load to the throat (center) of the hook.
Always be certain anchor will withstand load.
Always ensure hook latch is closed and not supporting load.
Always operate the winch with an unobstructed view of the winching operation.
Always seat load in throat of hook.
Always take your time when rigging and include a reasonable factor for safety.
Always use a hook with a latch.
Never apply load to hook tip or latch.
Never disengage the freespool while winch is under load.