Product Brochure

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
B-112
Metal Framing & Cable Tray — Superstrut
®
Metal Framing System
Threaded Products and Hardware
The unique scissor action of the Trapnut
®
Strut Fastener
closes at any desired position on the threaded rod. Once
closed, precision threads trap the threaded rod for a sturdy hold that
can be adjusted up or down for fine-tune positioning. While the versatile
Trapnut has a locking pin that holds it in the desired position, it can also
be removed and reused.
Unlike a hex nut, there is no need to
thread the Trapnut
®
from either end
of the rod, saving valuable time on the
job. While the Trapnut
®
Strut Fastener
is a time-saver for new construction, it
is invaluable for retro-fit applications.
Rather than disassembling an existing
trapeze to run additional conduit above
it, the Trapnut
®
fastener can be clamped
between the existing trapeze and the
beam clamp for a speedy retro-fit
solution. It’s ideal for applications
where the rod ends are not accessible.
The Trapnut
®
fastener has a sturdy steel
construction that is load bearing, so you
can be confident of a solid installation.
And, the Trapnut
®
fastener functions as
a hex nut, square washer and flat washer
combined, so there are fewer parts to
keep up with on the job.
Trapnut
®
Strut Fastener
CAT. NO. DESCRIPTION SIZE (IN.)
DESIGN
LOAD LBS.
STD.
CTN.
H 122 1/4
1
⁄4" GoldGalv
®
1
⁄4 150 50
H 122 3/8
3
⁄8" GoldGalv
®
3
⁄8 590 50
H 122 1/2
1
⁄2" GoldGalv
®
1
⁄2 1,080 50
H 122 1/4 EG
1
⁄4" SilverGalv
®
1
⁄4 150 50
H 122 3/8 EG
3
⁄8" SilverGalv
®
3
⁄8 590 50
H 122 1/2 EG
1
⁄2" SilverGalv
®
1
⁄2 1,080 50
H 122 1/4 SS6
1
⁄4" Type 316 Stainless Steel
1
⁄4 150 50
H 122 3/8 SS6
3
⁄8" Type 316 Stainless Steel
3
⁄8 590 50
H 122 1/2 SS6
1
⁄2" Type 316 Stainless Steel
1
⁄2 1,080 50
Hold in the open position.
• No need to thread the Trapnut
®
fastener
from either end of the rod — saving
valuable time
• Perfect for retro-fit applications where
the rod ends are not accessible
Press the pin with pliers.
• Locking pin holds it in the desired position
• Can be removed and reused
Insert the bottom plate on the rod and
close the top plate.
• Precision threads trap the threaded rod
for a sturdy hold that can be adjusted up
or down for fine-tune positioning
• Functions as a hex nut, square washer
and flat washer combined
Tighten to the desired position
with pliers.
• Can be adjusted up or down for fine-tuned
positioning
• Sturdy steel construction that is load
bearing
• Sized to provide custom fit for either
1
5
⁄8" or 1
1
⁄2" strut systems
1
Easy to Install
2
3
4
Standard method using nuts
and washers.
New method using Trapnut
®
Strut Fastener.
CAT. NO. H 122 3/8
Trapnut
®
Strut
Fastener GoldGalv
®
CAT. NO. H 122 3/8 EG
Trapnut
®
Strut
Fastener SilverGalv
®
NEW!
NEW!