Product Brochure

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
B-148
Pipe Straps, Conduit Clamps and Hangers
Metal Framing & Cable Tray — Superstrut
®
Metal Framing System
CT-720
CT-720 — Copper Riser Clamp
Normally used for the support of uninsulated vertical tubing where
no movement will occur. Please use C-720 for carbon steel piping
or C-720P for plastic coating requirements.
Note: This product is not designed to be supported with rods. Install using the
maximum suggested torque values shown in the Technical Section of this catalog.
C-724 — Ductile Iron Pipe Clamp
Can be used to secure mechanical joint piping or socket fittings together to
prevent separation under pressure either under or above ground, vertically
or horizontally. If using in this fashion, two (2) W-724 Socket Clamp
Washers and Figure 133 Rods are also required, but must be ordered
separately. The C-724 may also be used to support and guide vertical
ductile iron pipe.
C-724
A
4"
4"
A
CAT. NO.
TUBE SIZE
(IN.)
MAX. LOAD
(LBS.)
A
(IN.)
WT. EACH
(LBS.)
CT-720-1/2
1
⁄2 220 9
3
⁄16 .70
CT-720-3/4
3
⁄4 220 9
3
⁄16 .74
CT720 1 1 220 9
1
⁄2 .75
CT-720-1-1/4 1
1
⁄4 220 9
3
⁄4 .77
CT-720-1-1/2 1
1
⁄2 220 10
1
⁄8 .80
CT-720-2 2 220 10
1
⁄2 .84
CT-720-2-1/2 2
1
⁄2 390 11 1.60
CT-720-3 3 530 11
5
⁄8 1.80
CT-720-3-1/2 3
1
⁄2 530 12
5
⁄8 1.95
CT-720-4 4 530 13
1
⁄8 2.04
CT-720-5 5 810 14 3.50
CT-720-6 6 1,570 15 5.25
Standard Finish – GoldGalv
®
, unless otherwise stated.
CAT. NO.
PIPE SIZE
(IN.)
ACTUAL
PIPE O.D.
A
(IN.)
WASHER
SIZE (IN.)
WT. EACH
(LBS.)
C-724-3 3 3.96 12
1
⁄4
3
⁄4 9.00
C-724-4 4 4.8 13
3
⁄4
3
⁄4 9.00
C-724-6 6 6.9 15
3
⁄4
3
⁄4 10.70
C-724-8 8 9.05 18
3
⁄4 12.20
C-724-10 10 11.1 20
1
⁄8
3
⁄4 14.60
C-724-12 12 13.2 22
7
⁄8
3
⁄4 16.60
C-724-14 14 15.3 25
1
⁄2 1
1
⁄4 41.90
C-724-16 16 17.4 28 1
1
⁄4 61.90
C-724-18 18 19.5 33 1
1
⁄4 65.10
C-724-20 20 21.6 35
1
⁄2 1
1
⁄2 92.20
C-724-24 24 25.8 40
1
⁄2 1
1
⁄2 122.70
C-724-30 30 32 48 1
1
⁄2 184.00
Standard Finish – GoldGalv
®
, unless otherwise stated.
• Materials: Carbon Steel
• Finish: Standard Finish – GoldGalv
®
,
Black (add suffix “-B”), Electro-
Galvanized (add suffix “-EG”)
• Ordering: Specify pipe size, catalog
number and finish
.................................... Specifications ...................................
• Material: Carbon Steel
• Compliance: Federal Specification
A-A-1192A Type 8, MSS-SP-69
Type 8
• Finish: Copper
• Ordering: Specify tubing size and
catalog number
.................................... Specifications ...................................