Owners manual

ManualsBrandsSuperSprings ManualsAir SuspensionSSR-336-47-1 SumoSprings Fits 07-17 Sprinter 3500

021115

Mercedes Sprinter 3500 (2007-2015)

Part #SSR-336-47-1 & SSR-336-54-1

Excludes Sprinter with 2” block lift between axle & underside of springpack & axle

spacer under bump-stop

Passenger’s side (Driver’s side similar)

Tool List

Parts List

Floor Jack

Jack stands

Wheel blocks

9/16” wrench

9/16 socket wrench

7/32 Allen key

Item

Part #

Description

Quant.

512082

Upper T- bracket

512083

Upper spacer bracket

512084

Upper frame bracket RHS

521405

521400

Sumospring 5060-54

Sumospring 5060-47

512085

Lower bracket RHS (shown

at left in the assembly)

512086

Lower bracket LHS

512087

Axle strap

512207

3/8-16 x ¾” serrated flange

bolt

512245

3/4-16 x 7/8”FHCS

512223

3/8-16 x 1.25” hex bolt

512227

3/8 USS flat washer

512234

3/8-16 top-lock nut

512245

3/8-16 x 7/8” FHCS

512078

Heat Shield – passenger’s

side only

Summary of content (3 pages)

PAGE 1
Mercedes Sprinter 3500 (2007-2015) Part #SSR-336-47-1 & SSR-336-54-1 Excludes Sprinter with 2” block lift between axle & underside of springpack & axle spacer under bump-stop Passenger’s side (Driver’s side similar) Tool List Floor Jack 1 Jack stands 2 Wheel blocks 4 9/16” wrench 2 9/16 socket wrench 1 7/32 Allen key 1 Parts List Item Part # A 512082 Upper T- bracket 2 B 512083 Upper spacer bracket 2 C 512084 Upper frame bracket RHS 2 D 521405 Sumospring 5060-54 2 521400 Sumos
PAGE 2
Installation Instructions 1) Park vehicle of level hard surface. Place wheel blocks in front and behind the front wheels to prevent rolling. Observe all safety precautions and wear safety glasses. 2) Raise the rear of the vehicle allowing the axle to hang free and rest the frame on the safety jack stands rated for the vehicle. Removal of the rear wheels is optional. 3) Starting on the driver’s side. Remove the factory jounce bumpers from the underside of the frame and set aside.
PAGE 3
021115