User manual

56
EN
Set control button of hand transmitter
NOTE
The actuation of the door is preset by the supplier to
correspond to the second button of the hand transmitter.
1. Press „+“ (if necessary
press several times) until
„5“ is displayed.
2. Press „P“,
„2“ flashes.
(2 = factory setting)
3. Press „+“ or „-“ to select
the required channel.
1 = button 1
2 = button 2
4. Press button „P“ in
order to store the
setting.
5. Conclude programming
(refer to page 59, method 2)
or
proceed to next setting.