User manual

60
i
EN
5. Proper use
Permissible roller shutter area
Light plastic roller shutters up to 8 m
2
.
Other values apply to aluminium and wooden roller shutters.
NOTE
e information given is for guidance only and refers to the ideal installation
situation. Actual values may vary due to on-site conditions.
i
e electric roller shutter winder 2 in 1 is a roller shutter drive for indoor use only.
Its variable installation options means that it can be used as either a surface-
mounted or flush-mounted unit. e power is provided by the included power
supply.
Functional characteristics and control options:
◆ Manual operation (MANU)
◆ Automatic operation (AUTO), depending on timer for UP (s) and DOWN (t)
◆ AUTO/MANU switchover
◆ Automated solar function (diming under sunlight conditions with the help
of the solar sensor)
Obstacle detection
e movement of the belt is monitored. If the roller shutters hit an obstacle
during the DOWN (t)-movement, the belt will stop moving and the belt winder
is switched off.
After the system switches off, it is no longer possible to shift the shutters in
the same direction. Allow the belt winder to run back in the opposite direction
and remove any obstacles. Subsequently it is possible to operate the system
in the original direction again.
6. Brief description