User`s manual

Chapter 4: AMI BIOS
4-19
SOL Change Settings
This option species the base I/O port address and the interrupt request address of
Serial Port 2. Select Disabled to prevent the serial port from accessing any system
resources. The options are Auto, IO=3F8h; IRQ=4, IO=3F8h; IRQ=3, IO=2F8h;
IRQ=3, IO=3E8h; IRQ=5, IO=2E8h; IRQ=7, IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11,
12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
SOL Device Mode
Use this feature to select the desired mode for Serial Port 2. The options are Nor-
mal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for Serial Port 2. The options are SOL (Serial
Over LAN), and COM.
Serial Port Console Redirection
COM1, COM2
These two submenus allow the user to congure the following Console Redirection
settings for a COM Port specied by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM1 is Disabled,
and for COM2 is Enabled.
Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data
with a client computer, which is the remote computer used by the user.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirec-
tion. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set.
Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or
more bytes. The options are VT100, VT100+, VT-UTF8, and ANSI.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the