User`s manual

Chapter 4: BIOS

4-5

Maximum Capacity: This item displays the maximum capacity in the LBA

Format. (Note: The default setting changes when different devices are

installed.)

Multi-Sector Transfers

This item allows the user to specify the number of sectors per block to be used

for multi-sector transfer. The options are Disabled, 2 Sectors, 4 Sectors, 8 Sec-

tors, and 16 Sectors. (Note: The default setting changes when different devices

are installed.)

LBA Mode Control

This item determines whether the Phoenix BIOS will access the IDE Primary

Master device via the LBA mode. The options are Enabled and Disabled. (Note:

The default setting changes when different devices are installed.)

32-Bit I/O

Select Enable to enable the function of 32-bit IDE data transfer. The options

are Enabled and Disabled. (Note: The default setting changes when different

devices are installed.)

Transfer Mode

This option allows the user to set the transfer mode. The options are Standard,

Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.

(Note: The default setting changes when different devices are installed.)

Ultra DMA Mode

This option allows the user to conﬁ gure the Ultra DMA Mode. The options are

Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5. (Note: The

default setting changes when different devices are installed.)

Installed Memory

This feature informs you how much memory has been installed in the system as

detected by the BIOS.

System Memory

This feature informs you how much system memory has been detected by the

BIOS.