User's Guide

3-14

Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)

If you do not know the SCSI ID of a device you want to

configure, press Esc to get back to the Options menu. Then,

select SCSI Disk Utilities. A list of SCSI devices and SCSI ID

appears. Note the ID of the device you want to configure. Press

Esc to redisplay the Options menu, select Configure/View SCSI

Controller Settings, and then select SCSI Device

Configuration.

If you select Advanced Configuration Options, the Advanced

Configuration Options menu appears. To change a setting in

the Advanced Configuration Options menu, select the setting.

From the pop-up menu that appears, select a new setting.

5 When you are finished changing settings, press Esc until a

message prompts you to save the changes. To save the changes,

select Yes. To abandon the changes, select No.

6 Press Esc until prompted to exit the utility. Then, select Yes.

The computer prompts you if a restart is needed for your new

settings to take effect. (Changing the Boot SCSI Controller

setting or running the standalone SCSI utility forces an

automatic restart.) Otherwise, your new settings take effect

immediately.

Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (

= default)

Enabled

Press <Enter>

<F6> - Reset to Host Adapter Defaults

Advanced Configuration Options

Reset SCSI Bus at IC Initialization......................................................

Display <Ctrl><A> Message During BIOS Initialization........................

Extended Int 13 Translation for DOS Drives >1 GByte.........................

POST Display Mode..........................................................................

SCSI Controller Int 13 Support..........................................................

Domain Validation............................................................................

Support Removable Disks Under Int 13 as Fixed Disks .......................

BIOS Support for Bootable CD-ROM .................................................

Options Listed Below Have NO EFFECT if Int 13 Support is Disabled

Enabled

Verbose

Enabled

Disabled

Enabled

Adaptec SCSISelect(TM) Utility v4.00.0

ASC-39320D UG.book Page 14 Monday, July 22, 2002 1:42 PM