User's Guide

3-11
Configuring the Adaptec SCSI Card 39320D with SCSISelect
4 The Options menu appears. Select Configure/View SCSI
Controller Settings. (For details on Using SCSI Disk Utilities, see
page 3-15.)
The Configuration menu appears. The Configuration menu
displays the current settings for the SCSI bus interface. The BIOS
Information section at the bottom of the menu displays the
Interrupt (IRQ) channel and I/O Port Address of the selected
device. This section cannot be modified.
Note: Text displayed in yellow is for information only and
cannot be selected.
Adaptec SCSISelect(TM) Utility v4.00.0
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
*
=default)
Would you like to configure the SCSI card or run the
SCSI disk utilities? Select the option and press <Enter>.
ASC-39320D at slot 6, 00:0E:000
Options
Configure/View SCSI Controller Settings
SCSI Disk Utilities
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
*
=default)
SCSI Bus Interface Definitions
SCSI Controller ID .................................................
SCSI Controller Parity ..........................................
SCSI Controller Termination .................................
Additional Options
Boot Device Configuration......................................
SCSI Device Configuration ..............................
Advanced Configuration Options .....................
<F6> - Reset to SCSI Controller Defaults
7
Enabled
Automatic
Press <Enter>
Press <Enter>
Press <Enter>
Adaptec SCSISelect(TM) Utility v4.00.0
ASC-39320D at slot 6, 00:0E:00
BIOS Information
Configuration
Interrupt (IRQ) Channel.................................10
I/O Port Address............................................FC00h, F000h
ASC-39320D UG.book Page 11 Monday, July 22, 2002 1:42 PM