User's Guide

3-10
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
■ BIOS Support for Bootable CD-ROM—(Default: Enabled)
When set to Enabled, the SCSI card BIOS allows the computer
to boot from a CD-ROM drive. If booting from a hard disk or
other device, make sure no bootable CD is inserted, or disable
this option.
Changing Configuration Settings
The factory default settings for Adaptec SCSI cards are correct for
most computers. However, if you need to change the settings for
the SCSI card or a SCSI device:
1 If you have not yet installed the SCSI card and the SCSI devices,
do so now. Refer to your SCSI card Installation Guide for details.
2 Start SCSISelect. See Starting SCSISelect on page 3-3.
SCSISelect detects all Adaptec SCSI cards and displays the
model number, channel letter, slot number, and PCI address for
each card and channel. Channels are listed separately.
3 Select a channel and press Enter.
Adaptec SCSISelect(TM) Utility v4.00.0
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
*
=default)
39320D A at slot 6, 00:0E:00
39320D B at slot 6, 00:0E:01
ASC-39320D UG.book Page 10 Monday, July 22, 2002 1:42 PM