User's Guide

iii
Contents
1 Introduction
Ultra320 SCSI on the Adaptec SCSI Card 39320D 1-1
Device Drivers 1-3
Operating Systems 1-3
System Requirements 1-4
Understanding SCSI 1-4
SCSI IDs 1-5
Terminating the SCSI Bus 1-6
2 Using the Adaptec SCSI Card 39320D and SCSI
Devices
Using SCSI Devices 2-2
Using SCSI Hard Disk Drives 2-2
Using Ultra320/160 Hard Disk Drives 2-2
Using SCSI Devices 2-3
Combining SCSI and Non-SCSI Devices 2-3
Installing Multiple SCSI Cards 2-4
Connecting the LED Connector 2-5
Overriding SCSI Termination Settings 2-6
Connecting SCSI Devices 2-7
Maximum Cable Lengths 2-9
3 Configuring the Adaptec SCSI Card 39320D with
SCSISelect
Starting SCSISelect 3-3
Exiting SCSISelect 3-3
Using SCSISelect Settings 3-4
SCSI Bus Interface Options 3-4
Boot Device Configuration – Non-BBS Systems Only 3-5
SCSI Device Configuration Options 3-5
Advanced Configuration Options 3-7
Changing Configuration Settings 3-10
ASC-39320D UG.book Page iii Monday, July 22, 2002 1:42 PM