User's Guide

7-14
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
[xxxxx0ab] Driver already loaded for this host bus adapter
The driver is already loaded for this adapter. Verify that the correct
adapter is specified in your command line or startup file.
[xxxxx0ac] Driver already loaded for all host bus adapters
The driver is already loaded for all the supported adapters in this
system.
[xxxxx0a4] SCSI bus reset by third-party hardware
Hardware such as an array enclosure may have reset the SCSI bus.
This is a normal condition unless you receive additional errors.
[xxxxx0a7] Unable to allocate memory
[xxxxx0a8] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx0a9] Possible interrupt conflict
This indicates that the adapter IRQ conflicts with the IRQ of
another board installed in your system. Check your hardware
documentation for instructions on setting and changing IRQs.
[xxxxx0c9] Invalid command line parameter
A command line option for the driver is invalid. See Using the Load
Command Line Options on page 7-6 for valid command line options.
ASC-39320D UG.book Page 14 Monday, July 22, 2002 1:42 PM