User's Guide

7-9
Installing Novell NetWare
Mount Status
Mounting causes a drive to come online as a NetWare storage
device. Dismounted drives are inactive and cannot be accessed.
Before you eject your current media, you should first Dismount it
(menu choice 5). When the media status is Dismounted, you can
eject the media. However, NetWare does not allow you to
dismount it if the media is locked.
To insert your new media, wait for the drive to spin-up, and then
select the Drive Mount option.
Lock Status
If your removable-media device supports the Lock/Unlock
feature, you can lock the media (menu choice 6). The media must
be in the Not Locked state before you can eject it. If the media is
Locked, it cannot be ejected when you press the Eject button.
Using the NetWare Tape Backup
Included with Novell NetWare is a server-based tape backup
utility called
sbackup.nlm. This utility allows you to backup server
disk drives to a server tape drive. The utility supports Adaptec
host adapters.
Novell NetWare documentation contains instructions for loading
the server backup software. Refer to the NetWare Server Backup
Manual to load the
tapedai, tsa, and sbackup modules.
1 Once you have loaded
adpu320.ham, load tsaxxx.nlm (tsa312.nlm,
tsa400.nlm, tsa410.nlm)
and sbackup with these options:
:load scsi2tp.cdm
:load tsaxxx
:load sbackup
The appropriate driver that interfaces
sbackup to ASPI is loaded
automatically.
2 When sbackup is loaded, it asks for a login name. Enter the
appropriate name.
ASC-39320D UG.book Page 9 Monday, July 22, 2002 1:42 PM