User's Guide

6-6
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
To enter Windows XP parameters:
1 Select Run from the Start button.
2 Type regedt32 and press Enter.
3 Open the Registry list to the following location:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\
Services\adpu320\Parameters\Device
If the Parameters\Device keys already exist, skip to Step 8
below to begin entering values. If the keys do not yet exist, you
need to create them by continuing with Step 4.
4 Click on the adpu320 key.
5 Select Add Key from the Edit menu; type Parameters in the
Key Name edit box. Leave the Class edit box blank.
6 Click on the Parameters key.
7 Select Add Key from the Edit menu; type Device in the Key
Name edit box. Leave the Class edit box blank.
To specify a certain host adapter, append Device with the
number of the host adapter. For example, type Device0 for the
first host adapter, Device1 for the second, and so on. If you
omit the host adapter number, the configuration information
applies to all Ultra320 host adapters.
8 Click on the Device key.
9 Select Add Value from the Edit menu. In the Value Name edit
box, enter one of the valid parameter values. Make sure to enter
the appropriate data type for the value. To enter additional
values, repeat Steps 8 and 9.
Note: Changes made with the Registry Editor do not take
effect until you restart your computer.
ASC-39320D UG.book Page 6 Monday, July 22, 2002 1:42 PM