User's Guide

4-12
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
Driver Error Messages
The following error messages are listed sequentially according to
the last three digits of the error message. For example, [xxxxx010],
[xxxxx011], [xxxxx012], and so on.
Note: When reporting problems to Customer Support, be sure
to include the complete error message in your problem
description.
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
A request issued to a target device completed with indication that
there is an error. In most cases, the error is recovered and normal
operations continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
[xxxxxx99] Error issuing command
The driver does not recognize the target device.
[xxxxx021] Target device protocol error
An unexpected event occurred during data transfer between the
adapter and target device. Normally, this indicates a faulty or
noncompliant target device.
[xxxxx022] Adapter or target device protocol error
The adapter or target device has broken the communication
protocol. A badly behaving device could cause this message to
appear. Normally this is not a serious problem. If you get this
message frequently over a short period of time, it could indicate
that the device or system is malfunctioning. Unplug or turn off
unused devices to see if the problem persists.
ASC-39320D UG.book Page 12 Monday, July 22, 2002 1:42 PM