User's Guide

7-2
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
Installing the Driver When Installing NetWare
To install the adpu320.ham driver when you install NetWare, follow
the instructions below for the version of NetWare you are
installing.
NetWare 4.2
Follow these instructions only if you are installing NetWare 4.2 for
the first time:
1 Begin installation of NetWare 4.2 on your server as instructed in
your NetWare documentation.
2 When a screen appears that asks you to select a disk driver,
press Insert.
3 Insert the Ultra320 FMS driver floppy disk for NetWare into
your floppy disk drive.
4 Press F3 and type a:netware\v42_v50 as the path to the
adpu320.ham driver for NetWare.
5 Select adpu320.ham and press Enter.
6 Select No not to save existing file, Yes to save existing file
cdrom.nlm.
7 Select No not to save existing file, Yes to save existing file
nbi.nlm.
8 Select No not to save existing file, Yes to save existing file
nwpa.nlm.
9 Select No not to save existing file, Yes to save existing file
nwpaload.nlm.
10 Select Save parameter and continue and press Enter.
11 To install additional adapters, follow the procedures from
Step 5.
12 When complete, select Continue the installation to complete
the installation.
ASC-39320D UG.book Page 2 Monday, July 22, 2002 1:42 PM