User's Guide

ManualsBrandsSupermicro ManualsMotherboardX7DB8-X

3-13

Configuring the Adaptec SCSI Card 39320D with SCSISelect

If you select

Select

Master SCSI Controller

Boot SCSI

Controller

(non-BBS systems only)

the Master/Boot SCSI

Controller

Selection menu appears.

The asterisk indicates the

default master or boot SCSI controller and channel.

Note: D

efault settings are always marked with an asterisk. You

can press

to return all settings to the defaults.

If you select SCSI Device Configuration, the SCSI Device

Configuration menu appears. This menu lists the current device

settings for each SCSI ID, including IDs not assigned to a device.

Adaptec SCSISelect(TM) Utility v4.00.0

Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (

=default)

39320D A at slot 6, 00:0E:00

39320D B at slot 6, 00:0E:01

Adaptec SCSISelect(TM) Utility v4.00.0

Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (

= default)

Host Adapter Interface Definitions

Host Adapter Interrupt <IRQ> Channel ..............

SCSI Channel Interface Definitions

Host Adapter SCSI ID ........................................

SCSI Parity Checking ........................................

Host Adapter SCSI Termination ........................

Additional Options

SCSI Device Configuration ................................

Advanced Configuration Options .......................

Enabled

Press <Enter>

SCSI Device Configuration

#8 #9 #10 #11 #12 #13 #14

#15

SCSI Device ID

Sync Transfer Rate (MB/sec)....

Packetized..............................

QAS........................................

Initiate Wide Negotiation..........

Enable Disconnection..............

Send Start Unit Command .......

BIOS Multiple LUN Support......

Include In BIOS Scan...............

#0 #1 #2 #3 #4 #5 #6 #7

#8 #9 #10 #11 #12 #13 #14 #15