User's Guide

7-11
Installing Novell NetWare
6 Edit the driver load command in the startup.ncf file to include
the slot number (for example, load c:\server.312\adpu320
slot=2).
NetWare 5.x and 6.0
To use a CD with NetWare 5.x and 6.0, follow these instructions:
1 Load
adpu320.ham by entering the following line:
:load [pathname]adpu320
2 The
scsicd.cdm driver will auto-load if the device(s) are
detected.
Note: For multiple LUN CDs, enable multiple LUN
scanning with the lun_enable switch (for example, load
adpu320 lun_enable=FF). The lun_enable switch is
needed for
adpu320.ham. Type the following line at the
prompt: scan all luns
3 Type the following line at the prompt:
:load CDROM.NLM
Optimizing Performance
The Adaptec Ultra320 SCSI Bus Master firmware increases the
SCSI performance of the Adaptec Ultra320 host adapters under
multitasking environments. The firmware uses a paging
mechanism to handle up to 255 simultaneous SCSI commands. The
sequencer can simultaneously manage up to 128 tagged, or 1
nontagged, SCSI commands for each SCSI device, up to a limit of
255 SCSI commands. The firmware can queue as many commands
as the operating system is able to send to the host adapter. To set
this feature, enter the following command:
max_tags=n
ASC-39320D UG.book Page 11 Monday, July 22, 2002 1:42 PM