User's Guide

7-6
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
Using the Load Command Line Options
You can specify several command line options when the driver is
loaded. The available options are described in the table below. This
table describes command line options for the
adpu320.ham driver
for Ultra320 products.
adpu320.ham Command Line Options
Option Name
Default
Value
Acceptable
Values Definition
SLOT If none specified, NeWare
prompts you to choose.
Dependent on system
configuration. Obtains
a physical slot number
for the host adapter.
/LUN N/A N/A Scans all possible
LUNs.
MAX_TAGS 16 1-128 Maximum number of
tagged I/Os which
will be active per
device.
VERBOSE off on,y,1,off, n Displays host adapter
information.
INSTRUMENTATION 0ff on,y,1,off, n Enables/disables
recording of I/O
statistics and errors.
MULTLUN_TARGETS FFFF 0-FFFF A bit mask to enable
LUNs on selected
targets.
LUN_ENABLE 1 (Scan
LUN 0
only)
0-FF LUN scan enables
mask on all targets
.
IO_MAPPED off on,y,1,off, n Disables the auto
detection of PCI-X and
forces the use of I/O
Mapped. The default
is off in which it will
automatically detect
the PCI-X slot and use
I/O Mapped, or use
memory mapped
otherwise.
READ_STREAMING off on,y,1,off, n Enables read
streaming to be
negotiated for all
drives.
ASC-39320D UG.book Page 6 Monday, July 22, 2002 1:42 PM