User's Guide

6-14
Adaptec SCSI Card 39320D User’s Guide for Floppy Disks (OEM)
[xxxxx097] Unable to allocate memory
This indicates that there may be a problem with the amount of
memory installed in your system. Verify that your system has at
least the minimum amount of memory required by your operating
system.
[xxxxx0af] Unable to de-allocate memory that was allocated for a target device
Normally, this is not a serious problem, unless you get this
message frequently over a short period of time. The memory can be
reclaimed by restarting the computer.
[xxxxx0ce] Scatter/Gather limit exceeded
An I/O request packet from the system contained a Scatter/Gather
element list that contained more elements than are supported by
the miniport. Scatter/Gather is a list of data segments that define
the entire data transfer. Scatter/Gather is a means to improve total
data throughput. This error might be caused by a component
external to the miniport driver, such as the operating system or an
ASPI application.
[xxxxxd4] Adapter hardware failure - adapter reset
The host adapter hardware failed and the miniport driver has to
reset the hardware.
[xxxxx0d6] Internal driver error
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site.
ASC-39320D UG.book Page 14 Monday, July 22, 2002 1:42 PM