User`s manual

C-8
X6DH8-G2+/X6DHE-G2+ User's Manual
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to the
array.
Caution: Once the array is created and its properties are assigned,
you cannot change the array properties using the ACU. You will need to use the
Adaptec Storage Manager - Browser Edition. (Refer to Adaptec's User's Guide in
the enclosed CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the following screen), select an array
type and press Enter.
Note: only the available array types: RAID 0, and RAID1, are displayed on the
screen. (RAID 0 or RAID 1 requires two drives.)