User`s manual

4-10
X6DH8-G2+/X6DHE-G2+ User's Manual
PCI Parity Error Forwarding
Enable this item to forward the PCI errors occurring behind P2P bridges
to the South Bridge, so NMI can be asserted. The options are Enabled and
Disabled.
ROM Scan Ordering
This feature allows the user to decide which Option ROM to be activated fi rst.
The options are Onboard Option ROM fi rst and Add-On fi rst.
Reset Confi guration Data
If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD)
area. The options are Yes and No.
Frequency for PCI-X#1-#2/SCSI
This option allows the user to change the bus frequency for the devices installed
in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66 MHz, PCI-X
66 MHz, and PCI-X 100 MHz.
Frequency for PCI-X#3/G-LAN
This option allows the user to change the bus frequency of the devices installed
in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66 MHz, PCI-X
66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
Frequency for PCI-X#1 On Riser, Frequency for PCI-X#2-#3 On
Riser
(Available when a 2U Active Riser Card is present.)
This option allows the user to change the bus frequency of the devices installed
in the slot indicated. The options are Auto, PCI 33 MHz, PCI 66 MHz, PCI-X
66 MHz, PCI-X 100 MHz, and PCI-X 133 MHz.
PCI-X 100MHz ZCR Slot#1, PCI-X 100MHzSlot#2, PCI-X 133MHz
Slot#3, PCI-Exp x4 Slot#4, PCI-Exp x8 Slot#5, PCI-Exp x8 Slot#6 (or
PCI-Exp x8 Slot#6 and Riser, if a 2U Active Riser Card is present.)
Access the submenu for each of the settings above to make changes to the
following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled.