User`s manual

2-24
X6DH8-G2+/X6DHE-G2+ User's Manual
SCSI Enable/Disable (For the
X6DH8-G2+ only)
Jumper JPA1 allows you to enable or dis-
able the SCSI headers. Jumper JPA1 is
for SCSI Channel A and SCSI Channel B.
The default setting is pins 1-2 to enable all
four headers. See the table on the right for
jumper settings.
SCSI CH A/B Termination
Enable/Disable (For the X6DH8-
G2+ only)
Jumpers JPA2 and JPA3 allow you to en-
able or disable termination for the SCSI
headers. Jumper JPA2 controls SCSI
channel A, and JPA3 is for SCSI channel
B. The default setting is open to enable
(terminate) both SCSI channels. Note: the
manufacture default setting is "Open". For
SCSI to function properly, please do not
change the default setting. See the table
on the right for jumper settings.
SCSI Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SCSI channel Termination
Jumper Settings
Jumper Setting Defi nition
Open (Default) Enabled
Closed Disabled
B
A
C
GLAN1
®
JLAN1
S
UPER X6DH8-G2+
GLAN2
DIMM 2B (Bank 2)
DIMM 2A (Bank 2)
DIMM 3B (Bank 3)
DIMM 3A (Bank 3)
DIMM 4B (Bank 4)
DIMM 4A (Bank 4)
DIMM 1A (Bank 1)
DIMM 1B (Bank 1)
Fan1
8-pin
PWR
PWR
SMBus
FP Control
SPK
PW LED
JP15
Fan2
JOH1
Fan8
Fan3
JL1
IPMI
IDE1
Floppy
COM2
BIOS
JWD
JPA1
SCSI CH A
Ultra 320
SCSI CH B
Fan4
JPA2
7902
CTRL
SATA0
SATA1
USB2/3
SMBUS
Speake
r
PCI-X #1 100 MHz ZCR
PCI-X #2 100 MHz
PCI-X
#3 133 MHz
WOR
Battery
JPL1
GLAN
CTLR
RAGE-
X
USB4
82546
GLAN
Enable
X4 PCI-Epx #4
X8 PCI-Epx #5
X8 PCI-Epx #6
Super
I/O
North
Bridge
JPG1
VGA
COM1
USB0/1
KB/
Mouse
Fan6
Fan5
ATX PWR
4-Pin
PWR
JPF
Parrallel Port
24-Pin
Fan7
JP14
SCSI
JPA3
CPU 1
CPU 2
JBT1
ICH5R
SI/O
PXH
WOL
Ultra 320
IDE2
JP12
JP13
JLAN1
JLAN2
SEPC
South
Bridge
E7520
J27
DA1
DA2
LE1
A. SCSI Enable
B. SCSI Channel A Termi-
nation Enable
C. SCSI Channel A Termi-
nation Enable