User`s manual

Chapter 2: Installation
2-5
Figure 2-1. PGA604 Socket: Empty and with Processor Installed
Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both the motherboard
and the chassis match. Make sure that the metal standoffs click in or are screwed
in tightly. Then use a screwdriver to secure the motherboard onto the motherboard
tray. Please note that some components are very close to the mounting holes. Take
caution when installing or removing these components to prevent damage done to
the components.
Lever
Processor
(installed)
Triangle
Triangle
Empty socket
Warning! Make
sure you lift the lever
completely when
installing the CPU;
otherwise, damage
to the socket or CPU
may occur.
!