User`s manual

C-16
X6DH8-G2+/X6DHE-G2+ User's Manual
Rebuilding Arrays
Note 1: Rebuilding applies to Fault Tolerant array (RAID 1) only.
If an array Build process (or initialization) is interrupted or critical with one member
missing, you must perform a Rebuild to optimized its functionality. For a critical array
Rebuild operation, the optimal drive is the source drive.
Note 2: If no spare array exists and a hard disk drive fails, you need to create a
spare before you can rebuild an array.
To Rebuild an array:
1 From the Main Menu, select Manage Arrays (as shown in the screen below).
From the List of Arrays, select the array you want to Rebuild.
2 Press Ctrl+R to Rebuild.