User`s manual

C-12

X6DH8-G2+/X6DHE-G2+ User's Manual

Adding/Deleting Hotspares

Note: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add a

new HDD as a hotspare.

1. Turn on your computer and press Ctrl+A as prompted to access the ARC Util-

ity.

2. From the ARC menu, select Array Conﬁ guration Utility (ACU).

3. From the ACU menu, select Add/Delete Hotspares.

4. Use the up and down arrow keys to highlight and select the disk you want to

designate as a hotspare, and press <Insert>, and then, press <Enter>.

5. Press yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Select Drive Menu.