Datasheet

Chapter 1: Introduction
1-9
Introduction
X5DPR-8G2+/X5DPR-iG2+ Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear See Jumper Section
JD1 Speaker Enable (Pins 6-7) Closed (Enabled)
JPA1/JPA2 SCSI Channel A/B Termination Open (Terminated)
JD4 GLAN Enable/Disable Pins 1-2 (Enabled)
JP4 VGA Enable/Disable Pins 1-2 (Enabled)
JP9 Power Fail Alarm En/Disable Open (Disabled)
JP22 SCSI Enable/Disable Pins 1-2 (Enabled)
JP37/JD1 Watchdog Enable/Disable Open (Disabled)
JP38 Front Side Bus Speed Pins 1-2 (Auto)
Connector Description
ATX POWER Primary ATX Power Connector
COM1/COM2 COM1/COM2 Serial Port Connector
CPU1/CPU2 CPU 1 and CPU2 Sockets
CPU CHS FAN CPU 1 & 2 Chassis Fan Headers
DIMM#1A-DIMM#3B Memory (RAM) Slots
GLAN1/2 Ethernet Ports
IDE#1/IDE#2 IDE #1/#2 Hard Disk Drive Connectors
JA1 LVD SCSI CH A Connector
JA2 LVD SCSI CH B Connector
JD1 JBT1/WD/IR/CIR/USB2/PWRLED/SPKR
JF2 Front Control Panel Connector
JP7 Floppy Disk Drive Connector
JP8 Third Power Supply Fail Header
JP35 Keylock Header
JP36 Alarm Reset Switch
J15 Secondary ATX Power Connector
J28 Keyboard Port
J29 Mouse Port
OHLED Overheat LED Header
USB0/1 Universal Serial Bus Ports
VGA VGA Display (Monitor) Port
WOL Wake-on-LAN Header
WOR Wake-on-Ring Header