Datasheet

2-8
SUPER X5DP8-G2/DPE-G2/DPR-8G2+/DPR-iG2+/DPi-G2 User's Manual
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF2.
Refer to the table on the right for
pin definitions.
ATX Power Supply 24-pin Connector
Pin Definitions
Pin Number Definition
13 +3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PWR_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
2-5 Connecting Cables
ATX Power Connection
The X5DP8-G2/X5DPE-G2/X5DPi-
G2 power supply connector
meets the SSI (Superset ATX) 24-
pin specification, however it also
supports a 20-pin power supply
connector. Make sure that the ori-
entation of the PS connector is
correct. The X5DPR-8G2+/X5DPR-
iG2+ has the 20-pin connector.
See the tables on the right for pin
definitions.
Pins
1 thru 4
5 thru 8
Definition
Ground
+12v
8-Pin +12v Power Supply
Connector (J15)
ATX Power Supply 20-pin Connector
Pin Number Definition
11 +3.3V
12 -12V
13 COM
14 PS_ON
15 COM
16 COM
17 COM
18 -5V
19 +5V
20 +5V
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW -OK
9 5VSB
10 +12V
NMI Button
The non-maskable interrupt button
header is located on pins 19 and
20 of JF2. Refer to the table on
the right for pin definitions.
Pin
Number
19
20
Definition
Control
Ground
NMI Button Pin
Definitions (JF2)
Pin
Number
15
16
Definition
Vcc
Control
PWR_LED Pin Definitions
(JF2)
PWR_SEC Connection
In addition to the Primary ATX
power connector (above), the
Secondary 12v 8-pin J15 connec-
tor must also be connected to
your power supply. See the table
on the right for pin definitions.