User Manual

4-18
X10SDV Mini-ITX Series Motherboard User’s Manual
Maximum Payload
Use this feature to select the setting for the PCI Express maximum payload size.
The options are Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes,
and 4096 Bytes.
Relaxed Ordering
Select Enable to enable Relaxed Ordering support which will allow certain transac-
tions to violate the strict-ordering rules of PCI bus for a transaction to be completed
prior to other transactions that have already been enqueued. The options are
Enabled and Disabled.
Extended Tag
Use this item to allow a device to use the 8-bit tag eld as a requester. The options
are Disabled and Enabled.
ARI Forwarding
When this feature is enabled, the Downstream Port disables its traditional device
number to 0 when turning Type1 Conguration Request into a Type0 Conguration
Request. The default value is Disabled.
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
SLOT 7 PCI-E 3.0 X16 Bifurcation
Use this feature to set the PCI-E slot to operate as a sinlge x16 slot or to bifurcate
into two x8 slots. A proper riser card must be used to take advantage of bifurication.
The options are x8x8 and x16.
SLOT 7 PCI-E 3.0 X16 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in
this slot. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Use this option to enable Option ROM support to boot the computer using a network
device specied by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port 1 used for system
boot. The options are Disabled, PXE, and iSCSI.