User Manual

4-16
X10SDV Mini-ITX Series Motherboard User’s Manual
SATA Frozen
Use this item to enable the HDD Security Frozen Mode. The options are Enabled
and Disabled.
SATA AHCI LPM
Use this feature to enable the Link Power Management for SATA AHCI. The options
are Disabled and Enabled.
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link in a low power mode during
extended periods of I/O inactivity, and will return the link to an active state when
I/O activity resumes. The options are Enabled and Disabled.
SATA Port 0~ Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
• Model number of drive and capacity
• Software Preserve Support
Port 0 ~ Port 5 Hot Plug
This feature designates this port for hot plugging. Set this item to Enabled for
hot-plugging support, which will allow the user to replace a SATA drive without
shutting down the system. The options are Enabled and Disabled.
Port 0 ~ Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to initialize the
device. The options are Enabled and Disabled.
Port 0 ~ Port 5 SATA Device Type
Use this item to specify if the connected SATA device is a Solid State drive or a
Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive.
*If the item above "Congure SATA as" is set to IDE, the following items
will display:
Port 0 ~ Port 5 SATA Device Type (Available when a SATA port is
detected)
Use this item to specify if the connected SATA device is a Solid State drive or a
Hard Disk Drive. The options are Hard Disk Drive and Solid State Drive.
PCI ROM Priority
When there are multiple Option ROMs (Lega-
cy and EFI compatible), this feature species
what Option ROM to launch. The options are
Legacy ROM and EFI Compatible ROM.