Quick reference (1.0)
I-SATA5
I-SATA4
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SGPIO1
I-SGPIO2
S-SATA
JS39
USB0/1
FAN6
FAN5
FANB
FANA
FAN3
FAN2
FAN1
JBT1
LEDM1
LE1
LEDS5
LEDS6
DS13
JIPMB1
SP1
J23
JPS7
JPG1
JBR1
JI2C2
JI2C1
JVRM1
JVRM2
JPME2
JPS1
JWD1
JTPM1
USB2/3
BIOS
BT1
JSTBY1
JL1
JOH1
JD1
JS1
JF1
JPWR2
JPWR1
JPI2C1
USB4/5
USB6
USB7/8
BIOS
LICENSE
MAC CODE
BAR CODE
(3.0)
(3.0)
(2.0)
TPM/PORT80
CPU1 SLOT1 PCI-E 3.0 X8
SAS4-7
COM2
CPU1 SLOT2 PCI-E 3.0 X8
CPU1 SLOT3 PCI-E 3.0 X8
CPU2 SLOT4 PCI-E 3.0 X16
CPU2 SLOT5 PCI-E 3.0 X8
CPU2 SLOT6 PCI-E 3.0 X8
UID
P1 DIMMC1
P1 DIMMC2
P2 DIMME1
P1 DIMMD1
P2 DIMME2
P1 DIMMD2
P2 DIMMF2
P2 DIMMF1
CPU1
P1 DIMMB2
P2 DIMMH2
P1 DIMMA2
P1 DIMMB1
P2 DIMMH1
P1 DIMMA1
P2 DIMMG2
VGA
P2 DIMMG1
LAN2
LAN1
(3.0)
IPMI_LAN
COM1
PWR I2C
CPU2 SLOT7 PCI-E 3.0 X8
FAN4
J24
X10DRH-C/i(T)
Rev. 1.00
JPB1
JPL1
TFM
LE2
CPU2
SAS0-3
LSI 3108
SAS CTRL
PCH
BMC
CLOSE 1st
OPEN 1st
CLOSE 1st
OPEN 1st
Battery
LAN CTRL
S
UPERMICR
R
ContaCt InformatIon
MNL-1628 -QRG
• Website:www.supermicro.com
• GeneralInformation:marketing@supermicro.com
• TechSupport:support@supermicro.com
• Phone:+1(408)503-8000,Fax:+1(408)503-8008
© 2014 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without
Supermicro's written consent. All trademarks are the property of their respective entities. All information provided is deemed accurate at the
time of printing; however, it is not guaranteed.
PaCkage Contents
X10DrH-C/Ct/I/It
QuICk referenCe guIDe
for your system to work ProPerly, Please DownloaD tHe aPProPrIate
DrIvers/Images/user manual from tHe lInks below:
• Manuals:http://www.supermicro.com/support/manuals/
• Drivers&Utilities:ftp://ftp.supermicro.com/
• Safety:http://
www.supermicro.com/about/policies/safety_information.cfm
LED Indicators
Jumpers
Motherboard Layout and Features
DIMM Memory Installation
Jumpers and Connectors
Back Panel I/O Connectors
Memory Support
CPU Installation
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as the drawings shown in this guide.
Note: Refer to Chapter 1 of the user manual for detailed information on jumpers, connectors, and
LED indicators.
= mounting hole
Heatsink Installation
Front Panel Control (JF1)
CPU Support
Power Button
OH/Fan Fail/
PWR Fail LED)
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3 V
UID Switch
UID LED
Ground
Ground
1920
3.3V
X
Ground
NMI
X
NIC2 Link LED
NIC2 Activity LED
NIC1 Activity LED
Socket Keys
CPU Keys
OPEN 1st
Screw #1
Screw #2
Mounting Holes
Screw #3
Screw #4
INTEL CONFIDENTIAL
Intel and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other names and brands
may be claimed as the property of others. All products, dates, and figures are preliminary and are subject to change without any notice. Copyright © 2012, Intel Corporation.
Type
Ranks Per
DIMM
and
Data
Width
DIMM
Capacity (GB)
Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
1 Slot Per
Channel
2 Slots Per Channel
3 Slots Per Channel
1DPC 1DPC 2DPC
1DPC
2DPC
3DPC
4Gb
8Gb
1.2V 1.2V 1.2V
1.2V 1.2V 1.2V
RDIMM SRx4 8GB 16GB
2133 2133 1866
2133 1866 1600
RDIMM SRx8 4GB 8GB
2133 2133 1866
2133 1866 1600
RDIMM DRx8 8GB 16GB
2133 2133 1866
2133 1866 1600
RDIMM DRx4 16GB 32GB
2133 2133 1866
2133
1866 1600
LRDIMM
QRx4 32GB 64GB
2133 2133 2133
2133 2133 1600
DDR4 Memory POR for Haswell-EP
1
Release Tabs
Notches
Speed (MT/s)
Voltage (V)
Connectors
• One(1)SupermicroMotherboard
• X10DRH-i/iT:
Six(6)SATACables(CBL-0044L)
• X10DRH-C/CT:
Two(2)SATACables(CBL-0044L)andTwo(2)SAS
Cables(CBL-SAST-0532)
• One(1)I/OShield(MCP-260-00042-0N)
• One(1)QuickReferenceGuide(MNL-1628-QRG)
Dual Intel
®
E5-2600 v3 processors (Socket R3-LGA 2011); each processor supports
dual full-width Intel QuickPath Interconnect (QPI) links (of up to 9.6 GT/s one direc-
tion per QPI)
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers.
Refer to page 1-10 in the user's manual to determine which slots or devices may be affected.
The X10DRH-C/CT/i/iT motherboards support up to 1024 GB of Load Reduction (LRDIMM),
and up to 512 GB of Registered (RDIMM) DDR4 (288-pin) ECC 2133/1866 MHz memory
in 16 slots (2 DIMMs per channel). Memory speed support depends on the processors
installed in the system. For the latest CPU/memory updates, please refer to our website
at http://www.supermicro.com/products/motherboard.
Backplane I/O Panel
1. COM1 6. Back Panel USB 3.0 Port 5
2. IPMI_Dedicated LAN 7. Gigabit LAN 1
3. Back Panel USB 2.0 Port 0 8. Gigabit LAN 2
4. Back Panel USB 2.0 Port 1 9. VGA
5. Back Panel USB 3.0 Port 4
1
2
3
4
5
6
7
8
9
Jumper Description Default Setting
JBT1 Clear CMOS See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Pins 2-3 (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 GLAN1/GLAN2 Enable (X10DRH-C/i)
(10G) TLAN1/TLAN2 Enable (X10DRH-CT/iT)
Pins 1-2 (Enabled)
JPME2 Manufacture (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
JPS1 SAS Enable (X10DRH-C/CT only) Pins 1-2 (Enabled)
(CPU1) Slot2 PCI-Express 3.0 x8 slot from CPU1
(CPU1) Slot3 PCI-Express 3.0 x8 slot from CPU1
(CPU2) Slot4 PCI-Express 3.0 x16 slot from CPU2
(CPU2)Slot5 PCI-Express 3.0 x8 slot from CPU2
(CPU2)Slot6 PCI-Express 3.0 x8 slot from CPU2
(CPU2)Slot7 PCI-Express 3.0 x8 slot from CPU2
(I-)SGPIO1/2 Seria_Link General Purpose I/O headers 1/2 for SATA ports (I-SGPIO1 for
I-SATA0-3, I-SGPIO2 for I-SATA4/5)
SP1 Internal speaker/buzzer
UID UID (Unit Identication) switch
(BP) USB 0/1 (2.0) Backpanel USB 2.0 ports 0/1
(FP) USB 2/3 (2.0) Front accessible USB 2.0 connections (USB 2/3) header
(BP) USB 4/5 (3.0) Backpanel USB 3.0 ports 4/5
(FP) USB 7/8 (3.0) Front accessible USB 3.0 connections (USB 7/8) header
(FP) USB 6 (3.0) Front accessible Type A 3.0 connector (USB6)
VGA Backpanel VGA port
LED Description State Status
DS13 (X10DRH-C/CT) SAS Heartbeat LED Green: Blinking SAS Normal
LE1 Rear UID LED Blue: On Unit Identied
LE2 Onboard PWR LED On Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
LEDS5 (X10DRH-C/CT) SAS Activity LED Green: Blinking SAS Active
LEDS6 (X10DRH-C/CT) SAS Fault LED Red: On SAS Error(s) Detected
Connectors Description
BT1 (Battery) Onboard CMOS battery (See Chpt. 3 for Used Battery Disposal)
COM1/COM2 Backplane COM Port1/Front-accessible COM2 header
FAN1-6,A, B CPU/system fan headers (Fan 1-Fan 6, Fan A, Fan B)
J24 24-pin ATX main power connector (See Warning on Pg. 1-6.)
JD1 Speaker/Power LED header
JF1 Front panel control header
JIPMB1 4-pin external BMC I
2
C header (for an IPMI card)
JL1 Chassis intrusion header
JPI
2
C1 Power supply SMBbus I
2
C header
JPWR1/JPWR2 12V 8-pin power connectors (See Warning on Pg. 1-6.)
JSTBY1 Standby power connector
JTPM1 TPM (Trusted Platform Module)/Port 80 header
LAN1/LAN2 G-bit Ethernet (GLAN) ports 1/2 (X10DRH-C/i)
10G-bit Ethernet (TLAN) ports 1/2 (X10DRH-CT/iT)
IPMI_LAN IPMI_dedicated LAN support by the ASpeed controller
I-SATA 0-5 SATA 3.0 connectors supported by Intel PCH (I-SATA 0-5), (I-SATA4/I-SA-
TA5: can be used as Supermicro SuperDOM (Disk-on-Module) with built-in
power connectors)
S-SATA SATA 3.0 vertical connector w/4-SATA connections supported by Intel SCU
SAS(0-3,4-7(JS39)
(for X10DRH-C/CT)
SAS 3.0 connections (0-3,4-7) supported by the LSI 3108
(CPU1) Slot1 PCI-Express 3.0 x8 slot from CPU1