Datasheet

5-24
S
uperWorkstation 7045A-WT User's Manual
I
2
C Bus to PCI-Exp. Slots
Jumpers JI
2
C3 and JI
2
C4 allow you to
connect the System Management Bus
(I
2
C) to the PCI-E slots. The default set-
ting is Disabled. Both jumpers must be
set to the same setting See the table on
the right for jumper settings.
I
2
C to PCI-E Slots
Jumper Settings (JI
2
C3/JI
2
C4)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
TPM Enable/Disable
Jumper Settings (JPT1)
Pin# Defi nition
1-2 Enabled
2-3 Disabled
TPM
Jumper JPT1 allows you to enable TPM
(Trusted Platform Module) if a proces-
sors that supports TPM is used in the
system. The default setting is Enabled.
See the table on the right for jumper set-
tings. Note: You must enable TPM Sup-
port in the BIOS to use this feature.