Datasheet

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperWorkstation 7045A-
WT. Installation and maintenance should be performed by experienced technicians
only.
The SuperWorkstation 7045A-WT is a high-end server based on the SC743SQ-865
tower/4U rackmount chassis and the X7DWA-N, a dual processor serverboard that
supports dual Intel
®
Xeon
®
LGA771 processors at a FSB speed of 1600/1333/1066
MHz.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X7DWA-N serverboard and
the SC743SQ-865 chassis, which comprise the SuperWorkstation 7045A-WT.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperWorkstation 7045A-
WT into a rack and check out the server confi guration prior to powering up the
system. If your server was ordered without processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their instal-
lation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.