User`s manual

6-6

UPERSERVER 6035B-8R+ User's Manual

Figure 6-4. Removing a SCSI Drive Carrier

Important: All of the SCSI drive carriers must remain in the

drive bays to maintain proper cooling airﬂ ow.

Release Button

2. Installing/removing hot-swap SCSI drives

The SCSI drive carriers are all easily accessible at the front of the chassis. These

hard drives are hot-pluggable, meaning they can be removed and installed without

powering down the system. To remove a carrier, push the release button located

beside the drive LEDs. Then swing the colored handle fully out and use it to pull

the unit straight out (see Figure 6-4).

Note: Your operating system must have RAID support to enable the hot-plug ca-

pability of the SCSI drives.

Handle