Datasheet

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6015A-NT. In-
stallation and maintenance should be performed by experienced technicians only.
The SuperServer 6015A-NT is a high-end server based on the SC815TQ-560U
1U rackmount chassis and the Super X7DGU, a dual processor serverboard that
supports Intel
®
Xeon
®
5300/5100/5000 series processors and up to 32 GB of ECC
FBD DDR2-667/533 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X7DGU serverboard and the
SC815TQ-560U chassis, which comprise the SuperServer 6015A-NT.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6015A-NT
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.