User`s manual
4-9
Chapter 4: Chassis Setup and Maintenance
4-6 Installing the I/O Shield and Motherboard
I/O Shield
An I/O shield holds the motherboard ports in place. Install the I/O shield before you
install the motherboard. The maximum size of motherboard supported by the SC732
is a 12" x 13" extended ATX motherboard. The motherboard is sold separately from
the SC732 chassis and comes with an I/O shield specic to the motherboard.
Installing the I/O Shield
Review the documentation that came with the motherboard. Become familiar 1.
with component placement, requirements, and safety precautions.
Disconnect the chassis from any power source2.
With the illustrations facing the outside of the chassis, slide the I/O shield into 3.
the space provided.
Once installed, the chassis will hold the I/O shield in place.4.
I/O Shield
Figure 4-8: I/O Shield Placement