User`s manual

SC732 Chassis Manual

4-8

Figure 4-7: Installing 2.5" Hard Drives

If a hard drive is already present, remove it by carefully pulling the sides of 5.

the hard drive carrier outward.

Remove the hard drive from the hard drive carrier.6.

Insert the new hard drive into the hard drive carrier. 7.

Insert the hard drive carrier into the hard drive cage, sliding it towards the 8.

back of the the hard drive cage until it clicks into a locked position.

Slide the 2.5" hard drive cage back into the chassis and tighten the thumb 9.

screw to secure the cage.

Connect the related cables to the hard drive10.

Warning: Only enterprise level HDDs are recommended for use

in this chassis.