User`s manual

SC836 Chassis Manual
5-8
Installing an Expansion Card
Installing Expansion Cards
Remove the chassis cover.1.
Locate the motherboard port aligned with the card slot you want to install.2.
Each slot is secured by one screw located on the top (inside) the chassis. 3.
Remove this screw.
Remove the add-on/ expansion slot cover. 4.
Gently slide the expansion card into the correct motherboard slot. If the 5.
expansion card requires a riser card, install it at this time. If necessary, slide
the card into the PCI card guide and lock. Never force a component into a
motherboard or the chassis.
Secure the expansion card with the screw from the I/O panel.6.